Inspections of aerial lift machines and pre shift check up routines are very important. The issue on security is a lasting accountability to everyone concerned in the operation of aerial piece of equipment especially the boom lift. An inspection must be done while the buy of the equipment and every time the equipment is used.
The operator must take some minutes to search for the motor and every security functions to ensure that all is in good condition. This is very principal because aerial equipment is highly hazardous if not properly used. Every time a worker is up to operating the equipment, the possibility of crisis is increased.
The best means to preclude accidents is to search for the boom lift. Initially, begin to check up the engine. Check the level, color and smell of the oil. Check if the oil looks dirty and thick or if it smells fresh. You to have put in mind all the time that a watery or milky coloring in water-cooled part can be an indication of leakage in the head gasket, or any added cooling problem. search for the wiring also, if they are in the right connections, you can set up the engine. Make sure that you test every motor function, and ensure that the piece of equipment runs from both upper and lower controls.
Next, check the hydraulic drive and valve body and also check if there any leaks. You have to check also if there are any cracks, kinks and leakages in the hoses and the fitting of the hose. If you check the functions of the machine, you have to listen if there are noises which come from the hydraulic scheme.
Aerial boom lifts are susceptible to cracks in the pivot areas because of the implausible loads located in these points. Check cautiously the places wherein the arms of the boom come together, and where the bushings and pins are utilized. These are highly pressured areas; be sure to check if they have cracks or unusual wear. Test out if the rails have no cracks, not broken or not bent. Make sure also that the basket connection has no cracks; the bolts are complete and no inescapable troubles.
Another important thing is to test out the assembly of turret. When the basket is off the ground, just move slowly the basket side to side and check the free appeal of the principal turret gear or the slue ring. There must be a few movement but tiny to six up to ten degrees only.
Finally, search for the helms. Ensure that the arrangement of the helms look spoton and the haul nuts are tight. search for also the security switches of the machine. Make sure to test out all functions to make sure of the spoton operation of every component and in order to confirm that all unit works smoothly and in safe manner for security of the operator of the equipment. all the time check for the security manual in the safe and permissible functioning of the equipment before you buy the piece of equipment.
Aerial Boom Lift - The importance of Boom Lift motor Inspection